Drop your first cube

Run the same scene twice to see how a rigid body and a collider change what happens.

Drop the same cube twice to find out what makes it move and what lets it touch the floor. Start with the prepared scene, then build the same setup yourself.

Why does the same cube pass through the floor in one run?

How the data moves
  1. InputSame cube and floorcube-drop.usda · collider variant

    The two runs use the same cube, drop height, and camera. Only the cube’s collider changes.

  2. ProcessGravity and contactRigid Body + optional Collider → PhysX

    The rigid body can fall. Only the version with a collider registers contact with the floor.

  3. OutputWatch the final positionIsaac Sim viewport

    After Play, see where the cube ends up. Stop before choosing the other variant.

USD supplies the starting state and PhysX advances it

In cube-drop.usda, /World/DropBody is a rigid body. Its translation (0, 0, 3.5) sets the initial cube center. With metersPerUnit = 1, one coordinate unit equals a meter. upAxis = "Z" makes the third coordinate the height. Lab USD file

Role Where it is defined
Visible cube Size 1 on the child prim /World/DropBody/Cube.
Moving body The parent’s PhysicsRigidBodyAPI, mass, and initial pose.
Contact geometry The floor collider and the child’s PhysicsCollisionAPI in WithCollider.

Predict its resting height before playing

The top of the floor is at Z=0. A cube one meter tall has its center half a meter above its bottom face. With the collider enabled, expect its center to settle at about 0.5 m. Gravity still acts when the cube’s collider is disabled, but there is no cube-to-floor contact to resolve. Test that prediction by playing the two variants. Official simulation components

Choose an execution environment

If you have never launched the app, start with Isaac Sim GUI and CLI setup. Check the system requirements for an RTX workstation or the WebRTC setup for a Mac with a remote GPU machine. The Isaac Launchable runs in a browser on a remote GPU. Check the provided version and GPU charges first.

Open the practice scene

  1. Download cube-drop.usda. The file contains the shapes the example needs.
  2. In Isaac Sim, choose File → Open. Select LessonCamera from the viewport camera menu so both runs share the same view.
  3. Select World in Stage and find the collider variant in Property. While stopped, choose WithoutCollider and press Play. Watch for whether the cube crosses the floor height.
  4. Press Stop, choose WithCollider, and press Play again. Compare where the cube stops. If the scene retains the previous pose, reopen the file and select the variant before playing.

The two variants use the same starting height, floor, camera, and gravity. Only the cube’s collider changes.

Build the scene yourself

  1. Start with a new stage and add a ground plane. Create an Xform above it and put a Cube inside the Xform.
  2. Apply Rigid Body to the parent Xform. Play once and stop.
  3. Apply Collider to the child cube. Play again and compare. The ground plane already has a collision shape.
  4. Stop and save your stage as .usda so you can reopen it with the same starting pose.

Isaac Sim 6.2 physics fundamentals

Compare the two runs

The cube should pass through the floor with WithoutCollider and come to rest on it with WithCollider. On the RTX 5090 test in Isaac Sim 6.2.0, the enabled cube’s center settled at 0.50 m above the floor after 2.5 simulated seconds.

Next, replace the plane with a measured workbench asset. Workbench CAD to Isaac Sim